Home › Machines › Creality Falcon2 22W
Creality Falcon2 22W specs, bed size and cutting speeds
The Creality Falcon2 22W is a Diode (20 W) laser with a 400 × 415 mm work area. Below: full specs, real cutting speeds by material, and what a part costs in machine time. Drop your SVG, DXF or PDF to price your own file — it runs entirely in your browser and nothing is uploaded.
Open the calculator for the Creality Falcon2 22W →Creality Falcon2 22W specs
| Laser type | Diode (~450 nm) |
|---|---|
| Power class | Diode (20 W) |
| Bed size (work area) | 400 × 415 mm |
| Work area (inches) | 15.7 × 16.3 in |
| Cuts | opaque acrylic only (clear acrylic passes the diode beam), plywood, MDF, card, leather, fabric |
Creality Falcon2 22W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 6 mm/s | 53 s | €0.89 |
| MDF 3 mm | 6.6 mm/s | 48 s | €0.81 |
| Acrylic 3 mm | 5.4 mm/s | 59 s | €0.99 |
| Cardboard 3 mm | 10.5 mm/s | 30 s | €0.51 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
What this machine physically cannot do
This is a diode laser, roughly 450 nm blue light. That wavelength decides what it can touch, and no settings change moves the boundary:
It cannot cut clear acrylic. Transparent acrylic barely absorbs blue light — the beam passes straight through and marks whatever is under the sheet. This is the single most common disappointment with a diode machine, and it is physics, not power. Dark and opaque acrylic can be cut, because the pigment absorbs the beam. If clear acrylic matters to you, you need a CO2 machine.
It cannot engrave bare metal. It will mark coated, anodised or painted metal very well by burning the coating away, which covers most of what people actually want. Bare steel or aluminium needs a fiber laser.
What it is genuinely good at: wood, plywood, MDF, leather, card, felt, painted and anodised surfaces — and it is quiet, cheap to run and has no mirrors to align.
What fits, and what it is like to live with
The bed is 400 × 415 mm. In practice that means it takes an A4 sheet flat, and you can nest roughly 16 100 mm coaster blanks in a single run before you have to reload.
Anything bigger than the bed has to be cut in sections and joined, or ordered in pre-cut sheets. If you expect to work at A3 and above regularly, that constraint will shape your whole workflow — worth weighing before you buy.
The practical sweet spot for a hobby diode. 3 mm ply in a single pass, 6 mm in two or three, leather and card effortlessly. This is the class most small laser businesses actually run, because the jump to CO2 costs several times as much and only pays off if you need acrylic or real throughput.
Creality Falcon2 22W FAQ
How fast does the Creality Falcon2 22W cut 3 mm plywood?
About 6 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 53 s of machine time on the Creality Falcon2 22W.
Can the Creality Falcon2 22W cut clear acrylic?
No. The Creality Falcon2 22W is a diode laser (~450 nm) and passes straight through clear acrylic. It can cut dark, opaque acrylic. Use a CO2 laser for clear acrylic.
What is the Creality Falcon2 22W bed size?
The Creality Falcon2 22W has a 400 × 415 mm work area (15.7 × 16.3 inches). That is the largest part it can cut in one pass without repositioning the material.
How much does it cost to run the Creality Falcon2 22W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.89. Use the calculator to price your own file.
Where to buy the Creality Falcon2 22W
Prices move often — check current offers before you quote jobs on a machine you don't own yet.
Creality official store ↗ Check price on Amazon ↗
Some links are affiliate links: if you buy through them we may earn a small commission at no extra cost to you. It keeps this calculator free.
Machines similar to the Creality Falcon2 22W
Comparable on speed, bed size and material capability — the specs side by side:
- Atomstack A20 Pro — Diode (20 W), 400 × 400 mm, 6 mm/s in 3 mm plywood. similar class
- xTool D1 Pro 20W / S1 20W — Diode (20 W), 498 × 319 mm, 6 mm/s in 3 mm plywood. similar class
- Creality Falcon A1 Pro 20W — Diode (20 W), 358 × 268 mm, 6 mm/s in 3 mm plywood. similar class
- xTool S1 40W — Diode (40 W), 498 × 319 mm, 8 mm/s in 3 mm plywood. about 1.3× the cutting speed
Or see the full machine list and the complete speed table.
← All machine calculators · Full speed table · Main calculator