Home › Guides › xTool F2 vs F2 Ultra: is the MOPA worth it?
xTool F2 vs F2 Ultra: is the MOPA worth it?

Comparing the xTool F2 vs F2 Ultra? They share a name and a galvo design, but they are different machines. The F2 is a 15 W diode plus a 5 W infrared head working a 115 × 115 mm bed. The F2 Ultra swaps in a 60 W MOPA fiber laser (and, on the dual model, a 40 W diode) over a 220 × 220 mm bed, and it is the one that cuts thin metal and does colour marking. All numbers are from xTool’s own pages; we have not run either machine.
Quick answer: choose the F2 Ultra if metal is the job: xTool lists it cutting brass and stainless up to 2 mm and engraving in colour with adjustable pulse width, which the F2 cannot do. Choose the F2 if you mainly engrave tumblers, slate, leather and cards and want the smaller, much lighter machine. xTool says the F2 does not cut metal at all.
xTool F2 vs F2 Ultra specs
| Spec | xTool F2 | xTool F2 Ultra | Source |
|---|---|---|---|
| Lasers | 15 W diode + 5 W infrared | 60 W MOPA fiber + 40 W diode (the F2 Ultra Single is MOPA only) | xTool support articles 3042, 1961 |
| Work area | 115 × 115 mm | 220 × 220 mm | xTool support articles 3042, 1961 |
| With extension | 115 × 400 mm (slide extension) | 220 × 500 mm (conveyor) | xTool F2 and F2 Ultra product pages |
| Max workpiece height | 120 mm | 150 mm | xTool support articles 3042, 2272 |
| Max speed | 6,000 mm/s | 15,000 mm/s | xTool support articles 3042, 1961 |
| Diode cuts, several passes | 15 mm basswood, 12 mm black acrylic | 23 mm wood, 20 mm acrylic (dual model) | xTool support article 2818, F2 Ultra product page, tech-specs page |
| Metal cutting | None | Brass and stainless to 2 mm; silver and aluminium to 1 mm; gold to 0.2 mm per the product FAQ (xTool’s comparison text on the same page says 2 mm aluminium, so we do not repeat it) | xTool F2 Ultra product page |
| Colour marking | Not listed | Yes, MOPA only; pulse width 2–500 ns, frequency 30–4000 kHz | xTool support article 2272 |
| Camera | 50 MP | Dual 48 MP | xTool F2 and F2 Ultra product pages |
| Software | xTool Studio (not LightBurn at this time) | xTool Studio, XCS, LightBurn 2.2.0 or later | xTool F2 product page, support article 2272 |
| Weight | 4.6 kg | 21.6 kg (dual) | xTool tech-specs page |
| Class | Class 4 working lasers, enclosed | Class 4 working lasers, enclosed with interlocks | xTool support articles 2639, 2246 |
What the settings say
The two guides cover different jobs, which is itself the answer. Our F2 guide lists owner-shared rows for powder-coated tumblers (61% / 200 mm/s Yeti-style, 95% / 350 mm/s Stanley-style), microfibre, PU leather, cardboard, slate and black PLA on the infrared head, and none for bare metal. Our F2 Ultra guide lists xTool’s own metal cutting table: 304 stainless 1 mm at 100% / 800 mm/s / 130 layers in Embossment mode, 1 mm aluminium in flat mode at 100% / 100 mm/s / 10 passes, and colour engraving ranges for titanium and brass. The F2 Ultra guide carries no diode rows for wood or acrylic, because xTool publishes none we could read; the 23 mm wood figure above is a ceiling, not a setting.
Which one should you get?
- Metal cutting, jewellery, colour on stainless or titanium: F2 Ultra (or the MOPA-only Single).
- Larger blanks, more items per run, conveyor batches: F2 Ultra: 220 × 220 mm against 115 × 115 mm.
- Tumblers, slate, cards and leather on a bench or a craft-fair table: F2. 4.6 kg against 21.6 kg.
- Sheet cutting: neither; xTool’s numbers are multi-pass ceilings. See diode vs CO2.
The F2 launched in October 2025 and the F2 Ultra in July 2025 according to press releases we saw in search results; xTool lists both as available on 14 November 2026. Sources are xTool’s own spec pages and support articles, listed in the table or at the end; xTool’s store pages and support articles do not always agree with each other, and where they do not, we say so.
Also compare: xTool F1 vs F2 · xTool F1 vs F1 Ultra.
FAQ
What is the difference between the xTool F2 and F2 Ultra?
Per xTool, the F2 has a 15 W diode and 5 W infrared laser on a 115 x 115 mm bed, while the F2 Ultra has a 60 W MOPA fiber laser plus a 40 W diode on a 220 x 220 mm bed. Only the F2 Ultra cuts thin metal and does colour marking.
Can the xTool F2 cut metal?
No. xTool says the F2 marks metal with its infrared laser but has no metal cutting. The F2 Ultra cuts brass and stainless to 2 mm in several passes or layers.
Is the xTool F2 Ultra worth it over the F2?
If you work with metal or want colour marking, yes: nothing in the F2 does that. For tumblers, slate, leather and cards, xTool's data shows the F2 doing the job at 4.6 kg against 21.6 kg.
Does the xTool F2 Ultra have a diode laser?
The dual model has a 40 W diode plus the 60 W MOPA fiber. The F2 Ultra Single has the MOPA fiber only, so it cannot cut wood or acrylic.
Which xTool F2 works with LightBurn?
xTool says the F2 Ultra works with LightBurn 2.2.0 or later. For the F2, xTool's product page says it runs in xTool Studio and not LightBurn at this time.
How big is the work area of the F2 and F2 Ultra?
115 x 115 mm on the F2 (115 x 400 mm with the slide extension) and 220 x 220 mm on the F2 Ultra (220 x 500 mm with the conveyor), per xTool.
Where to look at them
xTool F2: Check price on Amazon ↗
xTool F2 Ultra: Check price on Amazon ↗
Disclosure: some links are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Prices are approximate list prices at the time of writing; always check the current offer.