Home › Guides › How to start a laser cutting business: startup…

How to start a laser cutting business: startup costs, hourly rate, margins and when to outsource

A flat lay of finished laser-engraved pieces

Starting a laser cutting business is mostly a pricing and sales problem, not a machine problem. This guide walks through startup costs, the hourly-rate math, product margins, example monthly numbers and the buy-or-outsource decision.

Is laser engraving profitable? The short version

Yes, for most shops that price by machine time and pick a niche. The machine is rarely the problem. The usual failures are underpricing, no steady source of jobs, and too few billable hours. A laser that runs 5 hours a week can pay for itself in months. A laser that runs 5 hours a month will not.

This page is the long guide: startup costs, the hourly-rate math, product margins, three example monthly P&Ls, and the buy-or-outsource decision. If you only want the headline figures, read the short numbers page first. All figures here are typical ranges for 2026, not quotes. Your rent, power cost and local prices will move them.

Startup costs by tier

Most people ask what it costs to start a laser cutting business. The honest answer is a range, because the machine is only part of it. Extraction, a chiller, materials stock and software add up fast. These are typical ranges, 2026; machines are priced separately by their vendors.

TierMachine classWhat else you needTypical total
Starter10–40 W diodeEnclosure, fume extraction, basic materials, software€1,000–€2,500
Workshop60–100 W CO2Chiller, extraction, air compressor, rotary, materials stock€4,000–€15,000
Production130–150 W CO2 or 1–3 kW fiberSoftware, insurance, premises deposit, larger materials stock€20,000–€120,000+

Three notes on the table:

Budget for materials stock as well. A first order of plywood, acrylic and test offcuts is easily €200–€600. See our guide to choosing a laser for a small business for how to match machine class to work.

The hourly-rate math

Do not price by what feels fair. Price by the cost of an hour at the machine. The formula is:

Hourly rate = (fixed monthly costs + owner pay target) ÷ billable hours + consumables per hour

Fixed costs are rent or a share of your home, power, insurance, software, machine payments and maintenance. Owner pay is what you want to take home. Consumables are lens, mirrors, tube wear, filters and air.

LineExample
Fixed monthly costs€1,500
Owner pay target€2,500
Billable hours per month80 h
(1,500 + 2,500) ÷ 80€50/h
Consumables per hour€5/h
Hourly rate€55/h

The number that surprises people is billable hours. Only about 30–50 % of the hours you spend at the machine can be billed. The rest goes to setup, file fixes, test cuts, finishing, packing and talking to customers. If you work 160 hours a month, plan on 50–80 billable ones.

Typical ranges once you run the numbers: a desktop CO2 comes out around €40–€70/h, a workshop CO2 around €60–€120/h, and a diode around €25–€45/h. Put your own costs into the hourly rate calculator to get your figure.

Margins on typical products

Margin here means price minus material and machine time, before design time, finishing, packaging, platform fees and your own hours. It is gross margin, not profit. Ranges below are typical, and they match the figures on the short numbers page.

ProductTypical priceMaterial + time costGross margin
Coasters (set of 4, engraved)€14–€28€3–€665–80 %
Engraved cutting board€25–€60€8–€2055–75 %
Acrylic sign, 200 mm€45–€80€6–€1285 %+
Keychains (batch of 50)€60–€120€10–€2275–85 %
Wedding place cards (batch of 80)€70–€140€12–€2575–85 %
B2B parts cutting (per job)€80–€400€25–€15040–70 %

Notice the pattern. Retail items give a high margin per piece but need marketing and packing. B2B cutting gives a lower margin, but jobs are larger and repeat. Use the product price calculator to check one product, and read how to price engraving for setup fees and minimum orders.

Three example P&Ls (monthly, as ranges)

These are illustrative ranges built from the rates above. They are not any real shop's books. Your result depends on how many hours you can actually sell.

Side-hustle diode

Line itemMonthly range
Revenue€400–€1,200
Materials (20–30 %)€80–€360
Platform and payment fees (10–15 %)€40–€180
Consumables, packaging, software€30–€90
Result before tax€150–€600

This is pocket money, and a good way to learn. Time is the limit, not the machine.

Workshop CO2, part-time

Line itemMonthly range
Revenue€2,000–€5,000
Materials (20–30 %)€400–€1,500
Fees and marketing (8–15 %)€160–€750
Power, maintenance, insurance, software€250–€550
Result before tax€800–€2,500

This is the tier where a niche starts to matter. Shops with a clear product or a few repeat B2B customers sit at the top of the range.

Full-time production shop

Line itemMonthly range
Revenue€8,000–€20,000
Materials (25–35 %)€2,000–€7,000
Staff, part-time help€1,500–€5,000
Premises, power, insurance, maintenance€1,200–€3,000
Fees, marketing, software€500–€1,500
Result before tax€1,500–€6,000

Costs grow in steps: a second person, a bigger unit, a second machine. Watch cash flow when you take that step, because revenue often lags the new costs by a few months.

Buy a laser or outsource your laser cutting?

Many people should not buy a laser at all. If you need less than about 10–15 machine-hours a month, outsourcing is usually cheaper once you count the machine, the space, extraction, materials waste and your learning time.

The break-even formula is simple:

Break-even hours = machine cost ÷ (shop price per hour − your own cost per hour)

Example: a €6,000 machine, a shop price of €60/h and your own running cost of €25/h. That is €6,000 ÷ €35 = about 170 hours. At 10 hours a month, that takes over 14 months. At 40 hours a month, it takes about 4. Your own cost per hour should include power, consumables, space and wear, but not your labour, which you also spend when you outsource (briefing, checking, shipping).

Five reasons to outsource

  1. Capital. You keep thousands of euros free for stock, marketing or a first employee.
  2. Materials access. A job shop buys sheets in bulk and holds many stocks and thicknesses you would never keep.
  3. Thicker or metal work. A 60 W CO2 will not cut 10 mm acrylic well and will not cut steel. A shop with a bigger or fiber machine will.
  4. No learning curve. Focus, kerf, air assist and fire safety take weeks to get right. Outsourcing skips that.
  5. Peaks. A big order does not stop your own machine for a week. You send the overflow out.

Four reasons to buy

  1. Iteration speed. You can fix a design in minutes, not days of shipping.
  2. Your designs stay yours. Files do not leave your hands, which matters for original products.
  3. Margins at volume. Past the break-even point every extra hour is mostly profit.
  4. Engraving is the product. Personalised items on customer-supplied goods need the machine close by.

A common path is to outsource first, learn what sells, then buy once your monthly hours clearly pass the threshold. For current shop prices read how much laser cutting costs, run your own numbers in the laser ROI calculator, or price a file right now.

Where the customers come from

A laser does not sell itself. Plan the first five customers before you buy the machine.

Many shops start on a marketplace and then move toward direct and B2B work. See how to sell laser work without Etsy.

Legal and safety basics

Rules differ by country and city, so check with your local authority or an accountant. This is a general checklist, not legal advice.

A 90-day plan

  1. Week 1. Choose one niche and write down your first 20 target customers.
  2. Week 2. Run the hourly-rate and break-even numbers. Decide between buying and outsourcing.
  3. Weeks 3–4. Outsource three or four samples, or buy the machine, extraction and a small materials stock.
  4. Weeks 4–5. Set up registration, insurance and a simple way to invoice.
  5. Weeks 5–6. Build five sample products and photograph them well.
  6. Weeks 6–8. Contact local B2B targets and open one sales channel, such as a marketplace listing or a small shop page.
  7. Weeks 8–11. Take your first paid orders. Track real machine time per job against your estimate.
  8. Weeks 11–13. Review the numbers. Adjust the rate, drop products that do not pay, and decide whether to scale or outsource more.

FAQ

Is laser engraving profitable in 2026?

Yes, when you price by machine time and focus on a niche. Gross margins on typical products run roughly 55–85 %, and a part-time workshop often nets €800–€2,500 a month. It is not profitable if you underprice, or if you cannot sell enough billable hours to cover your fixed costs.

How much does it cost to start a laser cutting business?

Typical ranges in 2026: a starter diode setup is €1,000–€2,500, a workshop CO2 setup is €4,000–€15,000, and a production setup starts around €20,000 and can pass €120,000. The total includes extraction, a chiller, software, insurance and a materials stock, not just the machine.

What hourly rate should a laser cutting business charge?

Work it out from your costs: fixed monthly costs plus your owner pay, divided by billable hours, plus consumables. Typical results are €40–€70/h for a desktop CO2, €60–€120/h for a workshop CO2, and €25–€45/h for a diode. Billable hours are only 30–50 % of your machine time.

Why should you outsource your laser cutting?

Outsourcing avoids the machine cost, the space, extraction and the learning curve, and it gives you access to materials and thicknesses you could not stock. If you need less than about 10–15 machine-hours a month, it is usually cheaper. It also handles peaks and metal or thick-material jobs.

What laser cutting products sell best?

Personalised items and small batches sell best: signs, coasters, keychains, place cards, tags and engraved boards. They carry gross margins of roughly 55–85 %. B2B parts cutting for signmakers, architects and model makers has lower margins, around 40–70 %, but brings larger, repeat jobs.

Can you run a laser cutting business from home?

Often yes, but check your lease, local rules and insurance first. You need proper fume extraction vented outside, fire safety, and space for the machine and materials. Noise, smell and neighbors can become problems. Many people start at home with a diode or small CO2 and move to a unit later.

← All guides · Price your file · By machine